Экспертные услуги по обслуживанию кондиционеров в Дубае

A full maintenance visit takes 60-90 minutes per unit and covers a detailed checklist. We start with a visual inspection of the indoor and outdoor units, checking for physical damage, corrosion, or loose mounting. We clean or replace filters, inspect the evaporator and condenser coils, and measure the refrigerant pressure with manifold gauges - low gas means a leak somewhere that needs tracing. The compressor gets an amp draw test to check if it's working within specs. We tighten all electrical connections, test the capacitor with a multimeter, and verify the thermostat reads accurately. The condensate drain line gets cleared to prevent water backup. On the outdoor unit, we wash the condenser coil with a pressure washer, check the fan motor bearings, and verify the unit's ground connection. You get a written report with findings, photos if needed, and recommendations. If we spot something that needs repair, we'll quote it on the spot - no obligation to proceed.